The Team Associated RC8.2 comes with a totally new wing mount. The wing holds in place by two screws instead of the four screws used in the previous kits. The new wing mount uses fewer parts and makes wing removal much easier. The kit includes a black JConcepts Illuzion wing.
The wing installation is a child play and I have noted no particular problem with its installation.
The next step is to install the rear end to the chassis. There are only two things to remember for this step. The first one is to apply a light coat of black grease to the chassis where the gearbox’s gasket goes to make it holds in place during assembly. The next thing to remember is to make sure that the rear brace is perfectly slotted into the chassis before tightening the brace to the chassis.
You should not spend a lot of time with the assembling of the Bag H. All steps are clearly explained in the instructions manual.
Stay tuned to MyRCBox.com by joining our newsletter or by becoming our friend on Facebook!
The Team Associated RC8.2 comes with a totally new wing mount. The wing holds in place by two screws instead of the four screws used in the previous kits. The new wing mount uses fewer parts and makes wing removal much easier. The kit includes a black JConcepts Illuzion wing.
The wing installation is a child play and I have noted no particular problem with its installation.
The next step is to install the rear end to the chassis. There are only two things to remember for this step. The first one is to apply a light coat of black grease to the chassis where the gearbox’s gasket goes to make it holds in place during assembly. The next thing to remember is to make sure that the rear brace is perfectly slotted into the chassis before tightening the brace to the chassis.
You should not spend a lot of time with the assembling of the Bag H. All steps are clearly explained in the instructions manual.
Stay tuned to MyRCBox.com by joining our newsletter or by becoming our friend on Facebook!
Airtronics
------------------------------------------------------------------------------------
Related posts:
- Team Associated RC8.2 – Build Report – Bag B – Steering Assembly
- Team Associated RC8.2 – Build Report – Bag F – Rear Bulkhead Assembly
- Team Associated RC8.2 – Build Report – Bag E – Front Suspension Assembly
- Team Associated RC8.2 – Build Report – Bag G – Rear Suspension Assembly
- Team Associated RC8.2 – Build Report – Bag J – Shocks Assembly
- Team Associated RC8.2 – Build Report – Bag A – Chassis Assembly
- Team Associated RC8.2 – Build Report – Bag C – Front, Rear and Center Differential Assembly
- Team Associated RC8.2 – Build Report – Bag K – Radio Tray Assembly
- Team Associated RC8.2 – Build Report – Bag I – Center Bulkhead Assembly
- Team Associated RC8.2 – Build Report – Bag D – Front Bulkhead Assembly
No Responses to “Team Associated RC8.2 – Build Report – Bag H – Wing Assembly”