Here’s a complete list of all bearings used on the RC10GT2.
| Location | Size | Part number |
| Clutch bell (inside) | 5x10mm | 2320 |
| Clutch bell (outside) | 5x9mm flanged | 2320 |
| Front wheels | 3/16″ x 3/8″ | 3977 |
| Rear hub (inside) | 3/16″ x 3/8″ | 3977 |
| Rear hub (outside) | .187″ x .500″ | 7935 |
| Rear diff outdrives | 3/8″ x 5×8″ | 3976 |
| Diff gear | 5/32″ x 5/16″ | 6589 |
| Idler gear | 3/16″ x 3/8″ | 3977 |
| Transmission shaft | 3/16″ x 5/16″ | 6901 |
| Steering bearing | 7889 |
Airtronics
------------------------------------------------------------------------------------
Related posts:
- Tech Article – RC8 – Bearing guide
- Tech Article – Thunder Tiger ST-1 – Bearing guide
- Tech Article – Monster GT – Bearing guide
- Tech Article – Monster GT Specs
- Tech Article – Team Associated GT2 Specs
- Tech Article – Monster GT – Best upgrades
- Tech Article – Thunder Tiger ST-1 Specs
- Tech Article – Team Associated RC18T Specs
- Tech Article – Team Associated B4 Specs
- Tech Article – Diff tuning guide for Buggy and Truggy
