Here’s a complete list of all bearings used on the ST-1.
| Location | Size | Part number |
| Steering bearing (4) | 5x10x4mm | TTRPD1968 |
| Clutch bell (2) | 5x10x4mm | TTRPD1968 |
| Front wheels Outside (2) | 8x16x5mm | TTRPD0662 |
| Front wheels Inside (2) | 10x19x5mm | TTRPD1969 |
| Rear wheels Outside (2) | 8x16x5mm | TTRPD0662 |
| Rear wheels Inside (2) | 10x19x5mm | TTRPD1969 |
| Front diff (4) | 8x16x5mm | TTRPD0662 |
| Rear diff (4) | 8x16x5mm | TTRPD0662 |
| Center diff (2) | 8x16x5mm | TTRPD0662 |
Airtronics
------------------------------------------------------------------------------------
Related posts:
- Tech Article – Monster GT – Bearing guide
- Tech Article – RC10GT2 – Bearing guide
- Tech Article – RC8 – Bearing guide
- Tech Article – Thunder Tiger ST-1 Specs
- Tech Article – Best Upgrades for the Thunder Tiger ST-1
- Tech Article – Thunder Tiger ST-1 – From RTR to Racer
- Tech Article – Thunder Tiger ST-1 – How to install rear wing
- Tech Article – Thunder Tiger ST-1 Setups
- Tech Article – Thunder Tiger ST-1 – Manuals and exploded views
- Tech Article – Diff tuning guide for Buggy and Truggy
