Buyers' guide - Truggy
You're looking for a vehicle not listed in this page ??? Please contact me, I'll add it.
Thunder Tiger ST-1 Pro |
|
 |
Manufacturer web site: www.thundertiger.com Street price: ???$US Part number: TTR6237-K10 Type: KIT Date added: April 2008 |
| What's required: .21 or bigger engine 2-Channel Radio + Receiver Steering Servo Throttle/Brake Servo Fuel bottle 8 AA batteries for the radio 4 AA batteries for the receiver Fuel Air filter oil |
|
Features |
Specs |
| Engine: Not Included Radio: Not Included Throttle Servo: Not Included Steering Servo: Not Included |
Length: 592mm Width: 415mm+/-5mm Height: 182mm Weight: 3300g Wheelbase: 359mm ~ 365mm Ground Clearance: 48mm |
| Other info: Low center of gravity, to increase responsiveness and provide better chassis balance 7075-T6 Aluminum Chassis – 3mm Thick Reinforced Upper Arms Newly designed adjustable turnbuckle and steering ball end Carbon Upper Deck, Steering Slider, Shock Towers, Center Differentials Top Plate and Front Servo Saver Top Plate Aluminum hardened Pivot Ball Machined anodized big bore shock adsorbers on both front and rear end Rear racing wing mount – Standard buggy rear wing is fit for installation Rear adjustable camber links Rear 7075-T6 chassis brace Front chassis torque rod Ball universal CVD shafts 7075-T6 – Low center of gravity engine mount 7075-T6 – Anodized RF (Rear Front) suspension mounts Front torque rod and rear 7075-T6 chassis braces Heavy duty CVD shaft set will greatly enhance drive efficiency and reliability on long race mains 7075-T6 RR (Rear Rear) suspension mounts Rear color coated sway bars Fuel diversion designed Fuel Tank with 150 c.c. capacity Hardened steel 50T spur gear Fuel-Resistant brake disks Lay down steering servo installation Newly designed Zero-Offset wheel |
|
Thunder Tiger ST-1 RTR |
|
 |
Manufacturer web site: www.thundertiger.com Street price: 380$US Part number: TTR6233-F Type: RTR Date added: April 2008 |
| What's required: 8 AA batteries for the radio 4 AA batteries for the receiver Fuel Air filter oil |
|
Features |
Specs |
| Engine: PRO-28BX-R pull start Radio: Two channel pistol grip 27mHz AM Throttle Servo: S2008MG Steering Servo: S2008MG |
Length: 485mm Width: 380mm+/-5mm Height: 182mm Weight: 3920g Wheelbase: 349mm ~ 365mm Ground Clearance: 48mm |
| Other info: Powerful 4.60cc PRO-28BX-R pull start engine with two needle slide carburetor TI-color anodized radio tray and steering brace Extra long and rigid suspension arms provide superior handling and better cornering ability 3 sets of durable gear differentials 8 spoke chrome wheels & race ready high grip tires Lowest C.G. provides stable handling and resists rollovers Fully equipped C.V. driveshafts, front, rear and center Enclosed radio box enables to install 5AA size batteries 150cc large capacity fuel tank with large fuel splash guard 4 machined aluminum oil-filled shocks with 3.5mm shafts, 8 shocks maximum possible Tuned pillow ball front suspension system for ease of camber tuning Variable toe & squat blocks equipped Aluminum tuned pipe & header High torque 8.Kg metal gear steering & throttle/brake servo included Full set of ball bearings to keep drivetrain components spinning freely Composite 3-shoe clutch Dual oil-resistant fiber disc brakes 3.5mm front/rear sway bar included 17mm hex drives fit Pro-Line 40 series tires Optional 2-speed transmission upgrades for maximum top speed |
|
