Team Associated Monster GT – Winter protection


Here’s a fast way to protect vitals parts of the Monster GT from water, snow and mud.

I simply cut a 2L Pepsi bottle to the proper size to protect electronics and transmission. I cut approximately a 6-7 inches long part starting at 1.5 inch from the bottle neck and then I cut it in two. I did two notches to pass trough the rollbar. The bottle is large enough to protect the steering servo from under the chassis. If you use a side exhaust, you’ll need to cut a piece of bottle for the exhaust. Your steering and brake servos and transmission are now protected from elements.

Team Associated Monster GT – Winter protection Articles   A 2L Pepsi bottle will protect all your electronics and transmission

Sylvain Lafrance

Sylvain Lafrance

Hello, my name is Sylvain Lafrance and I am the man behind MyRCBox.com. I have bought my first hobby grade RC in the early 90s. With years, what that started as a simple hobby, quickly became a strong passion. I am so much passionate about R/C that I have created MyRCBox.com in 2006 to share my experiences with R/C products that I use for racing and bashing. Follow me !

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Privacy Policy - Terms Of Service - Sitemap