Home » Articles » Thunder Tiger ST-1 Specs

Thunder Tiger ST-1 Specs

Thunder Tiger ST-1 Specs Articles

Manufacturer:Thunder Tiger
Model:ST-1 RTR
Street Price:575$US
Wheelbase:13.7″-14.4″ (349-365mm) adjustable
Width:15″ (380mm)
Weight:8.64lbs (3920g)
Length:19.1″ (485mm)
Height:7.2″ (182mm)
Front Track: 13.1″ (335mm)
Rear Track:13.6″ (345mm)
Ground Clearance:1.9″ (48mm)
Chassis type:3mm 7075 with radiused edges and front kick-up
Drive train type: CVA Shaft-drive 4WD, ALL-METAL CVA Center Driveshafts
Primary:13T clutch bell / 50T spur gear
Clutch type:3 shoes composite medium springs
Transmission ratio:4.3:1
Final drive ratio:16.54:1
Differential:Sealed bevel gear
Brake:Dual oil-resistant fiber disc brakes
Bearing type:Rubber sealed
Suspension Type:Front -> Pillow ball front suspension Rear -> Lower H-arms with turnbuckles With 3.5mm front/rear sway bar
Shocks:4 aluminium oil-filled, coil-over with 3.5mm shafts and rubber dust cover, 8 shocks maximum possible
Wheel type:17mm hex 8 spoke chrome wheel
Tire type:Thunder Tiger race ready high grip tires
Engine:Thunder tiger PRO-28BX-R with pullstart. 2 needle slide carburator Displacement: 4.63 cc. / 0.282 cu. in. Bore: 18.30 mm. / 0.720 in. Stroke: 17.6 mm. / 0.693 in. Practical RPM: 3,000 ~ 35,000 Weight: 460 g. wo/muffler
Tuned pipe: Dual-chamber, aluminum
Fuel Tank:150cc
Radio:Ace Jaguar XP2, 2 channel AM with steering dual rate, steering and throttle trim, and high and low throttle end-point (ATV) adjustments
Steering servo:Ace Jaguar S2008MG Metal gear, 111oz
Throttle/brake servo:Ace Jaguar S2008MG Metal gear, 111oz

Thanks for sharing...

Sylvain Lafrance

Hello, my name is Sylvain Lafrance and I am the man behind MyRCBox.com. I have bought my first hobby grade RC in the early 90s. With years, what that started as a simple hobby, quickly became a strong passion. I am so much passionate about R/C that I have created MyRCBox.com in 2006 to share my experiences with R/C products that I use for racing and bashing. Follow me !

Leave a Reply

*

Close Menu