News – Pro-Line Mid October New Releases‏

Oct 232010

12mm Wheel Adapters for SC10 Rear

This is a set of two Pro-Line SC10 12mm Wheel Adapters, and are intended for use on SC10 Rear Wheels. Are you tired of stripping the drive pin slot in your rear SC10 wheels? Look no more, Pro-Line has you covered with the release of the 12mm Wheel Adapters for SC10! Now you have the option of running Pro-Line popular ProTrac™ offset wheels with durable 12mm hex drives.

Features:

Made from 7075 Aluminum
Black anodized finish
Fits Pro-Line’s ProTrac™ offset wheels #2723 Split Six or #2727 Renegade.

What’s included:

12mm SC10 Rear Wheel Adapters (2)

BullDog Clear Body for B44.1

This is the Pro-Line BullDog Clear Body, and is intended for use with the Team Associated B44.1 1:10 off-road buggy. It all started when Team drivers Ryan Cavalieri, Travis Amezcua and Ty Tessmann put their heads together with the Pro-Line development team with a mission to develop bodies with class leading performance in the 1:8th ranks. This aggressive goal was achieved with the BullDog body line. Providing performance that has, at times, been deemed an unfair advantage. BullDog bodies now set the standard in performance. After achieving such impressive results, Pro-Line is now bringing BullDog cab forward technology to the 1:10 class.

Features:

Advanced cab forward design generates unmatched off-power steering
Low profile rear deck feeds wing with clean air flow
Made from durable / genuine Lexan®
Super-low styling giving your B44.1 the lowest center of gravity (CG) possible
Fabricated to fit snugly around each chassis component

What’s Included:

Clear Lexan® BullDog B44.1 Buggy Body, Under Tray and Wing
Decal sheet
Window mask included
Paint-then-peel overspray film included

Ford F-150 SVT Raptor Clear Body for Slash, Slash 4×4 & SC10

This is a Ford® F-150 SVT Raptor Clear Body for Slash®, Slash® 4×4 & SC10. Ford® fans here comes the ultimate off-road Short Course body with SVT Raptor styling! The Pro-Line Ford® F-150 race body for your Associated SC10, Traxxas® Slash® or Slash® 4×4.
Features:

Bold Ford® F-150 SVT Raptor styling
Bolt on modular number and side dam plates
Exceptional detail and style
Made with Crystal Clear Genuine GE Lexan®
Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Ford® F-150 onto your Slash®, Slash® 4×4, SC10
Made in the USA

What’s Included:

Ford® F-150 SVT Raptor Clear Body (1)
Number and side dam plates (2)
Aluminum Hardware Pack
Window templates
Decal Sheet

Suburbs M3 (Soft) Off-Road 1:8 Buggy Tires

These are Suburbs M3 (Soft) Off-Road 1:8 Buggy Tires. The wait is over. The ROAR National Champion Suburbs tread is now available for 1:8 buggy owners. Introducing the Suburbs in Pro-Line’s proprietary M3 (Soft) and MC (Clay) compounds. It only makes sence that the ever popular indoor and blue groove tread pattern would be made available to the 1:8th class.

Features:

National Championship winning compounds and tread design
Inner and outer radius rib tread for increased corner holding and predictable side-bite.
Internal sidewall ribbing maintains sidewall structure in extreme traction conditions for greater corner control
Tread height is predictable, aggressive, and long-lasting for use on a variety of blue-groove track and surfaces where you would typically run soft compound tires
Re-useable Closed Cell foam inserts
Pro-Line branded laser etched sidewall detail
Made in the USA

What’s Included:

Suburbs tires (2 pcs)
Closed Cell foam inserts (2 pcs)
Pro-Line decal (1 pc)

Street Fighter SC 2.2″/3.0″ M2 (Medium) Tires for Slash, Slash 4×4, SC10, Ultima SC & Blitz

This is a pair of Pro-Line Street Fighter SC 2.2″/3.0″ Tires. Looking for the ultimate long wear street tire? Then check out Pro-Line Street Fighter SC. Based on the latest in high performance on-road tire technology, the Street Fighter SC has the perfect balance G force devolping tread pattern and style that will keep your truck turning heads.

Tire Features:

Standardized 2.2″/3.0″ SC bead dimensions
Aggressive long wear tread
Made from M2 (Medium) compound

What’s Included:

Street Fighter SC 2.2″/3.0″ Left and Right Tires (2)

Renegade 2.2″/3.0″ Black Wheels

These are Renegade 2.2″/3.0″ SC Wheels. Radical, revolutionary maybe even a bit of an outlaw, that is what a Renegade is all about and it defines the new SC wheels from Pro-Line to a “T”. That’s right, the design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Be the Renegade at your track…

Wheel Features: