Team Associated RC8.2 – Build Report – Bag I – Center Bulkhead Assembly


It should not take you more than 10 minutes to assemble all the parts of the Bag I. When installing the brake pads, make sure you install them on the correct side of the bulkhead. The pads go on the bulkhead’s non flanged side. Don’t tight the pads too much, you should have a 4.5mm gap between each brake pad. When installing the brake cams, the flat side must face the brake pad.

Team Associated RC8.2 – Build Report – Bag I – Center Bulkhead Assembly Articles

I recommend you to assemble the whole bulkhead and center diff before trying to attach them to the chassis. Don’t forget to install the CVA bones into the center diff outdrives before installing it to the chassis.

Team Associated RC8.2 – Build Report – Bag I – Center Bulkhead Assembly Articles

Stay tuned to MyRCBox.com by joining our newsletter or by becoming our friend on Facebook!

 

 

Sylvain Lafrance

Sylvain Lafrance

Hello, my name is Sylvain Lafrance and I am the man behind MyRCBox.com. I have bought my first hobby grade RC in the early 90s. With years, what that started as a simple hobby, quickly became a strong passion. I am so much passionate about R/C that I have created MyRCBox.com in 2006 to share my experiences with R/C products that I use for racing and bashing. Follow me !

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Privacy Policy - Terms Of Service - Sitemap